Summary
On a drawing page, the drawing validation overlay cannot be dismissed by clicking — clicking does not close/clear it as expected, so the validation stays stuck on screen.
Environment
- App: Eva (B&J org)
- Packet:
FAS-01-1510-0034-A B&J.pdf — Part # 01-1510-0034 ("Ball Level, 3.2mm PIN"), Lot 304743-A, Rev A
- Mode: Evaluate, viewing a Drawing page (Packet Preview shows Drawing pages 5 / 18 / 19; hover tooltip "Page 4 - Drawing")
Steps to reproduce
- Open the FAS packet above in Eva and run analysis.
- Navigate to a Drawing page where drawing validation is shown.
- Click on the drawing validation to dismiss it.
- Observe: nothing happens — the validation does not dismiss.
Expected: Clicking the drawing validation dismisses/clears it.
Actual: Click has no effect; the drawing validation cannot be dismissed.
Reference
See the otter.ai recording for the discussion of this issue: https://otter.ai/u/jFM6hjCqOB13u7OsVR2QGxmUzfc (B&J <> Bild Weekly Sync, 2026-06-17).
Screenshot attached below for reproduction.
Summary
On a drawing page, the drawing validation overlay cannot be dismissed by clicking — clicking does not close/clear it as expected, so the validation stays stuck on screen.
Environment
FAS-01-1510-0034-A B&J.pdf— Part #01-1510-0034("Ball Level, 3.2mm PIN"), Lot304743-A, Rev ASteps to reproduce
Expected: Clicking the drawing validation dismisses/clears it.
Actual: Click has no effect; the drawing validation cannot be dismissed.
Reference
See the otter.ai recording for the discussion of this issue: https://otter.ai/u/jFM6hjCqOB13u7OsVR2QGxmUzfc (B&J <> Bild Weekly Sync, 2026-06-17).
Screenshot attached below for reproduction.